HT PLUS SEALANT
Is Outstanding For Sealing Scored And Marked Surfaces On Flange Faces, Gaskets, Pipe Joints, Pump Casings, Turbine Casings, Heat Exchangers, Condensers, Manway Covers, And Almost Any Similar Application Where Process Loss Might Be Avoided.

In Addition to sealing your damaged sufaces, HT Plus when used with a new gasket and proper torque sequence, greatly reduces process leakage.

For Maximum results, surfaces should be cleaned of all loose debris with wire brush or similar and it is recommended that a cleaner/degreaser be used.

HT Plus is easily removed after use in shut-down situations. This is accomplished with a wire brush and common solvents such as xylol, alcohol, acetone, or most any other solvent.

After surface preparation is complete HT Plus should be stirred and applied 1/8" to 3/16" thick to successfully seal damaged or scored surfaces.

HT Plus is easily removed after use in shut-down situations. This is accomplished with a wire brush and common solvents such as xylol, alcohol, acetone, or most any other solvent.

HT Plus is available in 10.2 fluid ounce tubes for easy application. HT Plus will be shipped via buyer's request. Same day delivery is available in certain areas.

HT Plus has a shelf life of twelve months if stored in a cool, dry environment.

HT Plus is manufactured and distributed by Colt Atlantic Services, Inc. which is a specialized engineering company that operates twenty-four hours a day, 365 days a year.